Qingzhou Zhongtai Mineral Sand Machinery Co., Ltd.

& Qingzhou Mining Chute Shandong Gold Preparation Equipment Shandong Placer Gold Chute Qingzhou Gold Rush Chute
>Chute gold panning uses the difference in the specific gravity of gold and sand. The slurry flows through the chute, and the gold with a large specific gravity difference is precipitated on the bottom layer, and the sand and other floating materials with small specific gravity are Washed away by the current on the upper level. The new gold selection chute uses gold panning felt to extract gold. Due to the hardening of the chute and the siltation of the trough, the net selection rate of gold extraction from the gold panning felt is only
. These weaknesses have been targeted and suppressed by the gold panning chute
The bottom plate is made of rubber plate, which is mechanically tortured to compress the sediment and solidify, thereby increasing the gold selection rate to above.
>Mineral gravity separation equipment, manufactured by Chinese engineers, is used for the extraction of placer gold ore. It has obvious achievements in selecting capillary gold and thin-skinned gold. It has a simple structure, reliable operation, few faults, low energy consumption and low water consumption. It is a powerful tool for panning placer gold deposits.
>
>Mineral gravity separation chute equipment is mainly used for the selection of placer gold ore. It has a very good effect on capillary gold and thin-skinned gold. It has a simple structure, reliable operation, few faults, low energy consumption and low water consumption. It is a powerful equipment for panning placer gold ores. It can also be applied to other gravity separation. It effectively overcomes the hardening phenomenon of the chute, reduces the siltation phenomenon, and significantly improves the recovery rate of fine-grained gold.
>Working principle: Chute gold panning utilizes the difference in specific gravity between gold and sand. The slurry flows through the chute, and gold with a larger specific gravity is deposited on the bottom layer, while sand with a smaller specific gravity floats on the upper layer and is discharged from the work area with the water flow. The original fixed chute used gold felt to extract gold. Due to the hardening of the chute and the siltation of the trough, the net selection rate of gold extracted from the gold felt was only about %. These shortcomings were overcome by the agitated chute with its bottom plate. Made of rubber plate, the bottom plate is mechanically agitated to slowly agitate to overcome the hardening of sediment. It is agitated periodically to complete stratification and sand discharge, thereby increasing the net separation rate to about %.
>The main features of mining gold mining chute: large gold ore processing capacity
>
No power, which can save mineral processing costs
>
Reasonable structure, high strength, Strong disassembly and assembly, easy transportation and relocation
>
Gold mining recovery rate is high, the recovery rate can reach %. Not only can granular gold flake gold be recovered, but also microgranular gold can be recovered
> < br/>It has strong adaptability and can be used for mineral processing in ore bodies under any conditions.
>'r H', H, 'Q r H', , placer gold purification equipment
Placer gold extraction equipment mercury paste separator equipment is a centrifugal gold separation equipment, which is suitable for placer gold and vein gold It is an ideal choice for gold panning and rock gold equipment in dry land or river channels. The mineral processing test has proven that the recovery rate of alluvial gold is above %. Especially when recovering the single gold in vein gold ores, when the grinding particle size is less than .%, the recovery rate of single gold can reach more than %. For. The recovery rate of single gold is over %. The ore discharge cycle of rock gold and alluvial gold are hours, and the enrichment ratio can be up to 2 times.
> Zhongtai
The main products of Zhongtai Machinery include
gold boats (sand pumping type, bucket type, cutter suction type, etc.), gold mining equipment, gold mining machinery, gold selection equipment, gold selection machinery, Water jacket centrifuge, alluvial gold equipment, alluvial gold machinery, mercury evaporator, gold rush, automatic washing machine, dry land alluvial gold equipment and more than dozens of products for you to choose from. The company also produces magnetic separators, iron sand ships, sand mining machinery, dredgers, sand screening machinery, sand washing machinery, stone washing machinery, crushers and other products. Products are widely used in: sand fields, metallurgy, mining, river port dredging, water conservancy and mining and other industries.
>
The company follows the principles of
cooperation, harmony, development and win-win
and has established deep friendship and good cooperative relations with suppliers across the country. In the ever-changing market economy Dashao**
To seek development, we adhere to the business philosophy of integrity, brand, service and innovation
to jointly create brand building, harmonious marketing, and establish a win-win strategic partnership.
Qingzhou Zhongtai Mineral Sand Machinery Co., Ltd. warmly welcomes new and old users to negotiate and make friends all over the world. We hope to create a brilliant tomorrow together
!
>
Gold selection chute
Mining chute
Mining chute
Gold dressing equipment
Alluvial chute
Gold panning chute
Gold mining chute
Gold dressing machinery
Mining Equipment
Shandong Gold Preparation Chute
Small Gold Preparation Equipment
Gold Dipping Chute
Chute Gold Preparation